.046 compliant pin typ. 60 plcs. tin plated see note 3 28.40 1.12 14.86 .59 .695 17.65 3.12 .123 1.00 25.45 contact pins .025 [0.64] sq. posts gold plated see note 3 2. bag (1) m2 x 8 pan head phillips screw to be inc luded with header 5. see sheet 2 for note. of nickel 3. header contact pins plated 30 min. microinches of gold over 100 min. microinches of nickel. the compliant pins plated 100-200 microinches of tin over 50 min. microi nches 6. see sheet 2 for note. 4. continuous max. carry current 5 amps dwg.no. rev description revisions date engr a do not scale drawing b c d a b c d 4 3 2 1 4 3 2 1 b notes: 1. for application use & care information consult v pc users guide @www.vpc.com j shand 9/9/2014 ecn #5477 7/12/11 c inches dimensions are shown as: 510109206 sheet 1 of 2 rev provided. consult with virginia panel corporation e ngineering if more detail is required. 510109206 customer drawing www.vpc.com b module hdr 60 position 18117 cage code size virginia panel corporation 3:1 scale: or disclosed in whole or in part for any purpose ot her than to maintain the equipment and is submittedfor use by the customer only. the d ata shall not be duplicated, used, the information contained herein is the exclusive p roperty of virginia panel corporation [millimeters] rt ang comp pin
3.57 .141 a b c d a b c d 4 3 2 1 4 3 2 1 rev b 2 of 2 sheet 510109206 510109206 dwg.no. cage code 18117 2:1 scale: size c the information contained herein is the exclusive p roperty of virginia panel corporation and is submitted for use by the customer only. the data shall not be duplicated, used, or disclosed in whole or in part for any purpose other than to maintain the equipment provided. do not scale drawing customer drawing - customer drawing - custome r drawing notes: 5. for application use and care information consult vpc users guide @ www.vpc.com 6. recommended pcb layout connector mounts this side board thickness = [1.57] .062 or [2.29] .090 dimension tolerance = .[.13].005 unless otherwise specified pcb layout for 310130104 receiver component side shown silkscreening optional pc b c l .014 a b c .006 a b c b c 9.65 .380 88.90 3.500 min length 7.14 .281 22.86 .900 9 eq. spcs. @.100 [2.54] 14.83 .584 36.83 1.450 12.70 .500 4 eq. spcs. @ .100 [2.54] 3.76 .148 48.02 1.891 .100 thru non-plated .100 thru non-plated .043 .038 1.09 0.97 plated thru hole |
